W-10 DS


Our economical line of W-Series flash welders offer maximum quality for minimum cost. These compact units are production ready, and simple to use. They are capable of both welding and annealing lades as a standalone unit, or the AC-200 anneal control can be added for automated 2-stage annealing. With a design that has been proven for over 50 years, you can be assured your welder will last a very long time.

We offer three different models in our W-Series line of welders: the W-10 DS, W-15 DS and the W-20 DS, for welding up to 1", 1.5" and 2" blades respectively. All three models feature adjustable alignment upset pressure and weld cut-off, plus built-in annealing capability, dual hardened shafts in the movable carriage assembly, and a high efficiency 220 volt, single phase, 8 KVA

Options Include:

  • 440 volts
  • Water cooled carriages
  • Built-in Grinder
  • Automated 2-stage anneal control


Power 220 Volts, 50 or 60 Hz, 50 Amps
Blade Capacity - Width - Carbon 1 in  (25 mm)
Blade Capacity - Width - Bimetal 3/4 in  (19 mm)
Blade Capacity - Thickness - Min .014 in  (.35 mm)
Blade Capacity - Thickness - Max .042 in  (1 mm)
Shipping Weight 160 lbs

W-Series Options

(SO) = Special Order

440 Volts, 50 or 60 Hz, 25 Amps (SO)
Clear Acrylic Flash Protector
Export Packaging (+25 lbs.) (SO)
W-30 Upgrade for 3” coil joining (SO)
W-40 Upgrade for 4” coil joining (SO)
Water Cooled Carriages (SO)
WG-xx Grinder Option (+15 lbs.)