FW-200 HPA
The FW-200 HPA is a Hydraulic clamp, Pneumatic upset, Automaic cycling welder designed to weld carbon and bimetal blades from 1/4" x .020" through 2" x .063".
FW-200 HPA Features
- PLC control
- Large 15 KVA transformer
- Standard 220 volts, Single phase (other voltages available)
- Water-cooled carriages
- Digital, programmable motor control
- Precision weld cut-off control for more consistent welds
- Adjustable weld parameters: Jaw Gap, Timing, Weld Voltage, Upset Force, Flashing Speed
- Automated 2-stage anneal control with on-the-fly adjustment
- Audio-Visual malfunction alarms
- Hydraulic clamping with foot pedal actuation
- Pneumatic forging up to 2,250 lbs
- Air blow-off
- 3 operating modes: Automatic, Manual, Weld Only
- Pressure relief during annealing
Specifications
Incoming Power | 220 VAC, 50 or 60 Hz (selectable), 80 Amps min. |
Welding Transformer | 15 KVA |
Blade Capacity - Width - Carbon | 2 in 52 mm |
Blade Capacity - Width - Bimetal | 2 in 52 mm |
Blade Capacity - Thickness - Min | .020 in .5 mm |
Blade Capacity - Thickness - Max | .063 in 1.3 mm |
Shipping Weight | 1100 lbs |
FW-Series Options | Clear Acrylic Flash Protector FW-200 Tool Kit (HPA/HSA, HS, MS) FW-250 Upgrade for 2 5/8" capacity (SO) 380, 440 Volts |